Sewing Notions to Help You Create the
Perfect Project
OMNIGRID - OMNIGRIP RULERS
Omnigrip by Omnigrid features
seven basic size rulers with a fabulous new feature: Non-SLIP backs!
Omnigrip
also features left and right handed numbering and angle system
and transparent neon green double-sight lines.
RN105 -
10 1/2" x 10
1/2"
$18.95
Non-Slip Ruler for Quilting, Sewing & Crafts. For use with Rotary Cutters &
Straight Edge Blades - Right and left-hand numbering & angle system.
Diagonal line for triangle Cuts. Extra 1/2in on two sides for seam
allowance.
RN14 - 4" X 14"
$14.95
This
ruler makes quick work of cutting sashing strips and strips from fat
quarters. Also a handy stowaway for travel and classes.
A convenient, multi-purpose ruler. Standard angle and 1/8" markings are included.
RN12 - 6" x 12"
$ 14.95
A
shorter version of the 6" x 24", this ruler has the same versatility and
markings. It is most popular for secondary cutting of strips into squares
and shapes. Handy for cutting fat quarters, it packs
and travels nicely for
classes.
RN125 -
12 1/2" x 12
1/2"
$22.95
The
square master, this ruler can be used to square up any finished block up to
12-1/2". The 1/2" seam allowance is included on two sides, making it perfect
for cutting background blocks. Also convenient for cutting larger
custom-size squares, rectangles and wide borders.
R1264S - Omnigrid Trio
Three different ruler lengths
- 4" , 6" and 12" - make it easy to mark a variety of items. The ruler
markings are highly visible and the fine center line leaves no doubt where
to align the ruler. Handy for classes and taking along in a sewing
basket. (These are regular Omnigrid rulers - Not the neon variety.)
RN24 - 6" X 24"
$21.95
This
ruler is the all-purpose basic for beginners to advanced quilters. The 24”
length stretches across the width of fabric as unfolded from the bolt,
making it easy to cut long strips. Includes 30º, 45º, and 60º angle markings
plus 1/8” markings throughout.
RN28 - 2" x 8"
$10.99
Convenient Size with Easy-to-read markings. Designed for Creating
Chenille, Cropping Photos or Trimming Paper-Pieced Blocks. 45º Lines Provide
Markings for Perfect Miters.
RN205 - 20" Square
$44.95
This is a
BIG ruler that has endless uses! Cutting, squaring and setting blocks is
simple and easy with this invaluable tool. One of its most unique uses is to
set blocks on point without doing the math! This ruler also takes the guess
work out of cutting squares for size and corner triangle settings. And, just
like all Omnigrip rulers, it has a non-slip surface on the under side.
RN2518 - 2.5" x 18"
$15.95
For use with Rotary Cutters & Straight Eedge
Blades. Right and Left-hand Numbering & Angle System. Diagonal Line for
Triangle Cuts Extra ½" on Two Sides for Seam Allowance. 30°, 45°, and 60°
Angle Markings.
RN35 - 3-1/2"
Square
$6.50
This
little ruler
includes a 1/2" seam allowance, making it the perfect size template for 3"
finished squares. Useful for cutting and trimming miniatures and checking
seam allowances, it is handy to tuck into any sewing kit or basket.
R4C12 - Omni
Arc Circle Cutter
$22.95
For
cutting circles from material folded into quarters. Use a 28mm rotary
cutter. Finished sizes 4 inch to 12 inch.
RN55 - 5 1/2" Square
$12.50
Convenient size with easy-to-read markings.
For use with rotary cutters and straight edge blades. Right and left-handed
numbering and angle system. Diagonal line for triangle cuts - extra 1/2" on two
sides for seam allowance.
RN65 - 6 1/2" Square
$11.95
This
multi-purpose ruler is a must have for every quilter. Foundation
piecers love it for trimming seam allowances and squaring up their finished
blocks. It is a perfect template for 6" finished blocks, common in baby
quilts, because it includes a 1/2" seam allowance.
RN614
- 6" x 14" Diamond-Free $20.95
Designed by Nancy Johnson-Srebro
(see her book, Stars by Magic, C&T Publishing) while making
eight-pointed stars using only squares and rectangles , this ruler is clean
and efficient for general cutting. There are no 30, 45, or 60 degree
markings. For squares, rectangles
and strips. The outer
¼" edge of the ruler is highlighted for quick and accurate marking and
trimming. No confusing angle
markings.
RN85 - 8 1/2" Square $15.95
A perfect companion for our popular 8½" x 24" rectangle, this
ruler is handy for sub-cutting the 8½" strips into squares. With the extra 1/2",
the seam allowance is built in for 8" finished squares. Also handy for squaring
and trimming.
For use with rotary cutters and straight edge blades. Right or left-hand
numbering and angle system. Diagonal line for triangle cut - extra 1/2" on
two sides for seam allowance.
RN8512 - 8 1/2" x 12" $16.95
Requested by photo transfer and
scrapbooking enthusiasts, this ruler cuts the perfect width for computer
printers. The 12" length provides room to trim a perfect 8½" x 11"
rectangle, as well as cut strips. Great for work with freezer paper, and
cutting fat quarters and eighths.
For use with rotary cutters and straight edge blades.
Right and left-hand numbering and angle system. 30°, 45°, and 60°
angle markings.
RN8524 - 8 1/2" x
24"
$ 25.95
For years quilters have requested a ruler for
cutting 8" borders. A 1/2" seam allowance is
included along one side, making it easy to cut a border of any width up to
8" finished. Also handy for secondary cutting of blocks up to 8" finished.
Standard angle and 1/8" markings are included.
RULER GRIPPERS
SUPER RULER GRIPPER $21.95
You won't believe how
much this tool will make a difference in your cutting accuracy!
Just position our handy gripper on your favorite ruler, press down the
levers and you are ready to go!
SMALL RULER GRIPPER
$18.75
This is the smaller
version the Super Ruler Gripper. It is perfect for all those smaller
rulers in your quilting room! Attaches by suction to any smooth surfaced
ruler.
MINI RULER GRIPPER
$7.25
The Mini Gripper is a mere 2 1/4
inches round. The gripper's single suction cup will work with smooth
surface rulers and templates under 4in wide. Use it on all small rulers
and templates.